How to Download Dell Laptop Drivers, Dell Desktop and Tower Drivers

How to Download Dell System Drivrs
Most of peples try to download driver form third party web site but i recommend you every time when you need to search the driver of Dell system open following website
you can download drivers easily, and always remember the System Model no. System model number or Dell asset tag Help you in Driver Downloading.

How To Convert File System, fat - fat32 to ntfs

How To Convert File System, fat - fat32 to ntfs
open a dos prompt and give the command
convert d: /fs:ntfs
this command would convert your d: drive to ntfs.
if the system cannot lock the drive, you will be prompted to convert it during next reboot.
Normally you should select yes.
Conversion from fat/fat32 to ntfs is non-destructive, your data on the drive will NOT be lost.
Be aware that converting to ntfs will make that partition of yourdrive unreadable under dos unless you have ntfs utilites to do so.


many websites ( stream songs and videospeople believe they cannot be downloaded, quite why i dont know. they kinda think there is no file present to dwnld once the file is located it can then be retrieved by nettransportnettransport is able to dwnld any file whether ftp or rtsp etc

1. Download Project URL Snooper 1.02.01 from
2. Install URL Snooper (and WinPcap together)
3. Don't run URL Snooper when it is done installing
4. Restart computer
5. Open Project URL Snooper
6. Click on the General Options Tab
7. user posted image
8. Chose a network adapter
9. Now click on the search tab
10. Click Sniff Network
11. Go to a webpage and you should see some results in the results list
12. If nothing is appearing then chose another network adapter, until one works
13. Now you are ready to begin searching

14. Click the "Hide Non-Streaming URLs" option to hide all http:// references and only show URLs corresponding to streaming audio/video (rtsp, pnm, wma, etc.)
15. Then click Sniff Network
16. Your links should appear as you begin streaming your file
17. Select your desired stream user posted image
18. usually rm file user posted image
19. On the bottom there should be the link which you simply copy user posted image
20. Download nettransport from here orftp://nettransport:nettransport@61.153.24...Setup_multi.EXE

21. Install it
22. Click on new
23. Paste link

now you should be able to download any fileif u need ne helpjus aski think dialups may have problems

Howt o Creat a Bootable Windows XP SP1 Cd with Nero

How to create a bootable Windows XP SP1 CD (Nero):

Step 1
Create 3 folders - C:\WINXPSP1, C:\SP1106 and C:\XPBOOT

Step 2
Copy the entire Windows XP CD into folder C:\WINXPSP1

Step 3
You will have to download the SP1 Update, which is 133MB. Rename the Service Pack file to XP-SP1.EXE Extract the Service Pack from the Run Dialog using the command: C:\XP-SP1.EXE -U -X:C:\SP1106

Step 4
Open Start/Run... and type the command: C:\SP1106\update\update.exe -s:C:\WINXPSP1
Click OK
Folder C:\WINXPSP1 contains: Windows XP SP1

How to Create a Windows XP SP1 CD Bootable

Step 1
Download Code: Code:
( no download manager !! )
Extract file (xpboot.bin) in to the folder C:\XPBOOT

Step 2
Start Nero - Burning Rom. Select File > New... from the menu. 1.) Select CD-ROM (Boot) 2.) Select Image file from Source of boot image data 3.) Set Kind of emulation: to No Emulation 4.) Set Load segment of sectors (hex!): to 07C0 5.) Set Number of loaded sectors: to 4 6.) Press the Browse... button

Step 3
Select All Files (*.*) from File of type: Locate boot.bin in the folder C:\XPBOOT

Step 4
Click ISO tab Set File-/Directory length to ISO Level 1 (Max. of 11 = 8 + 3 chars) Set Format to Mode 1 Set Character Set to ISO 9660 Check all Relax ISO Restrictions

Step 5
Click Label Tab Select ISO9660 from the drop down box. Enter the Volume Label as WB2PFRE_EN Enter the System Identifier as WB2PFRE_EN Enter the Volume Set as WB2PFRE_EN Enter the Publisher as MICROSOFT CORPORATION Enter the Data Preparer as MICROSOFT CORPORATION Enter the Application as WB2PFRE_EN
* For Windows XP Professional OEM substitute WB2PFRE_EN with WXPOEM_EN * For Windows XP Home OEM substitute WB2PFRE_EN with WXHOEM_EN

Step 6
Click Burn tab Check Write Check Finalize CD (No further writing possible!) Set Write Method to Disk-At-Once
Press New button

Step 7
Locate the folder C:\WINXPSP1 Select everything in the folder and drag it to the ISO compilation panel. Click the Write CD Dialog button.
Press Write
You're done.